New Ergo Lift Workstations and Carts from Gibo/Kodama
After years of success with its chair lines, Gibo/Kodama is now releasing an all-new selection of premier workstations and carts. Build better, more efficient workspaces
New Products
Laird Thermal Interface Materials Now at PAC
The overheating of electronic components and systems remains a tough roadblock for electronics manufacturing, aerospace, semiconductor, and other relevant industries. When overheating occurs electronic components
Introducing A New Heavier Weight ESD Smock from StaticTech
StaticTech is back and better than ever with its new heavier weight ESD Smock line. The new lines’ premium quality, high performance, and custom options
Why is Industrial Shelving Better than Pallet Racking?
This article was re-printed with permission from Metalware. Almost all warehouse storage facilities; 3PLs, distribution centers, eCommerce fulfillment centers, and retail distribution centers contain industrial
Why is JBC a Better Soldering Solution? Here are 10 Reasons.
#1. Solder at Lower Temperatures The combination of High-Power Mass Ration Tips and an Integrated Heater / Thermocouple delivers lower soldering temperatures and the best
What’s New from Desco, SCS, EMIT, and MENDA?
Alvarado EDM Turnstile with SmartLog Pro® SE Controls access to the ESD Protected Area to operators that have passed their pre-defined ESD tests and have
Custom ESD Smocks Available
Our StaticTech ESD smocks provide the highest quality at a great price. The 9406 series smocks are a light weight (94% Polyester and 6% Carbon) yet durable garment.
FOUNDATION Modular Platforms from Wearwell Now Available
Foundation modular platforms are a wonderful addition to any workspace. Not only are they easy and cost effective but they keep your employees healthy and safe. Reaching up and down takes a toll on one’s body so putting your staff at the proper elevation is critical. They also keep employees off the ground and away from potential floor hazards. Foundation platforms are sturdy and can easily form larger or complex configurations by using the joints and connectors.
Mobile Hand Washing Stations and Sinks for Manufacturing
Portable hand sinks have internal water supply and waste water storage. The standalone unit with powered pump supply requires no additional plumbing, drains, or inlets.
Mars Air Shower Curtains – Industrial Air Curtains for Doorways and Restaurants
What’s an air curtain and what should I consider before buying one? There are a handful of different air curtain distributors and manufacturers. MARS air curtains offer additional accessories and configurations for HEPA filtration, heated blowers, and insect control.
Medical Device Cleanroom Build Part 7: Cleanroom Validation Steps | Processes
What are the steps for medical device cleanroom validation? Cleanroom validation ensures cleanroom construction meets the performance standards set forth during cleanroom planning, cleanroom installation, and cleanroom calibration.
Stencil Wipe Rolls – New Understencil Wiping Rolls for SMT DEK EKRA MPM Printing
Polymeric resin-bonded stencil wipes encourage solder paste and adhesive retention. The fabric density performs better under vacuum than paper-based products. Air is able to pass through the microstructures and permit uniform contact with the board under squeegee pressure for a controlled removal.
Cleanroom Sticky Rollers and Foam Mops for Walls Ceilings, and Floors
Cleanroom tacky rollers and sticky foam rollers remove particulate from flat and slightly textured surfaces within a cleanroom. Extendable mop handles with adhesive rollers on the ends allow easy access to cleanroom, floors, ceilings, and walls.
Kimberly-Clark Professional™ PPE, Garments, and Recycling Program (RightCycle)
Demand for eco-sensitive products and zero-waste initiatives has never been more pronounced. When you purchase Kimtech and KleenGuard products from Production Automation (PAC), you get the benefit of RightCycle by Kimberly-Clark Professional. This program delivers a sustainable approach for managing used nitrile gloves, single-use apparel items, and safety eyewear.
BOFA Extractors for Soldering, Lasers, Cutting, Dust and Engraving
What are the differences between BOFA fume extractors? What’s the best system for laser cutting, soldering, fluid dispensing, or high-volume particulates? Learn more about the differences between each product and see where you can find them online.
New: Prostat Resistivity Testers & Monitors
Prostat electrical test equipment includes ohmmeters, electrical resistance testers, and full scale static control evaluation systems for ANSI/ESD requirements.
New: Texwipe Cleanroom Products
Texwipe offers a variety of dry, pre-saturated, and sterile wipes to meet the strict demands of controlled environments. Texwipe swabs are manufactured to exacting and consistent tolerances with lot coded for traceability and quality control.
Ansell Gloves: Hyflex, Nitrile, ESD and Cleanroom
View the newest Ansell gloves for cleanroom, general purpose, chemical protection, and static control.
New: Low Particulate Cleanroom Tape
Premium cleanroom tape and labels are feature non-particulating materials with plastic cores suitable for use in ISO 3 (Class 1) cleanrooms. Each roll and label is cleanroom bagged and packaged in a Class 100 (ISO Class 5) cleanroom to ensure cleanliness upon arrival.
Get 10% Off The Rolls-Royce of Stereo Inspection
Lynx EVO Eyepiece-less microscopes allow operators use of eyeglasses or safety glasses when inspecting or observing through the viewer. Floating stage (option) provides sensitive control and accurate sample inspection. Ideal for inspecting fragile samples, or for avoiding contamination by handling.
