USP 797 Cleanroom Design
USP 797 Cleanroom Requirements
USP 797 Non-Hazardous Pharmaceutical Compounding - Positive Pressure Cleanroom Design
United States Pharmacopoeia USP 797 took effect on January 1st, 2004 as a regulatory document which outlines procedures and environmental requirements for compounded sterile preparations (CSPs). Favorable outcomes in USP 797 cleanrooms also require proper laminar flow, workstation placement, operator technique, sanitation, and room air cleanliness.
USP Chapter <797> expands compounding guidelines for the preparation, storage, and handling of sterile drugs, both hazardous and non-hazardous.
UPS 797 Non-Hazardous Cleanroom Design
USP Chapter 797 cleanroom design requires that facilities pressurize non-hazardous compounding and storage areas. ISO 5, 7 and 8 environments support primary engineering controls, buffer rooms, and ante-rooms.
- ISO Class 5 Primary Engineering Control (external venting not required)
- ISO Class 7 Positive Pressure Compounding Room
- ISO Class 8 Positive Pressure Ante Room
Positive pressure ensures that in the case of a breached barrier, the space maintains sterility. Positive pressure rooms allow compounding of TPN (Total Parenteral Nutrition), antibiotic injections, eye-drops, infusion, syringes, salves, oils, and more. A direct compounding area with an ISO Class 5 laminar flow device requires no less than 30 ACH (air changes per hour).
USP 797 Hazardous Cleanroom Design
While USP 797 previously established requirements for hazardous drug compounding, USP Chapter 800 sets forth new requirements. USP 800 is the latest United States Pharmacopeia (USP) revision which clarifies and expands upon hazardous drug compounding (both sterile and non-sterile). Enhanced engineering and procedural controls extend protection to operators and environments when packaging, handling, and compounding hazardous substances (including 2018 updates to the NIOSH list). USP 797 facilities compounding or handling hazardous drugs may require a number of new concessions including updated equipment, storage, engineering controls, and negative pressure environments. What upgrades does a USP 797 facility require for USP 800 compliance?
- ISO Class 5 Primary Engineering Control
- ISO Class 7 Negative Pressure Buffer Room
- ISO Class 7 Positive Pressure Ante-Room
- 0.01″ of Water Column Relative to the Adjacent Area
- An Equivalent CACI with Respect to Sterile vs Non-Sterile Parameters
Negative pressure environments mitigate the risk for harm to both the environment and workers when compounding or packaging antineoplastic drugs, hormonal therapies radiopharmaceuticals, or during the research of pathogens, viruses, and other harmful bacteria.
USP 797 Hazardous Compounding UpdatesWhile USP 797 previously established requirements for hazardous drug compounding, USP Chapter 800 sets forth new requirements. USP 800 is the latest United States Pharmacopeia (USP) revision which clarifies and expands upon hazardous drug compounding (both sterile and non-sterile). Enhanced engineering and procedural controls extend protection to operators and environments when packaging, handling, and compounding hazardous substances (including 2018 updates to the NIOSH list). USP 797 facilities compounding or handling hazardous drugs may require a number of new concessions including updated equipment, storage, engineering controls, and negative pressure environments.
USP 797 Cleanroom Requirements: Furniture, Ceilings, Walls Floors, and Process Support Equipment
All furniture and materials that enter the area must be non-permeable, non-shedding, cleanable, and resistant to disinfectants. Ceilings, walls, floors, shelving, fixtures, cabinets, pass-throughs, and counters must also support cleaning, be non-shedding, and remain free of cracks and crevices that hinder sanitation.
Cleanrooms have limited space. Factoring in the footprint, ergonomics and aseptic management of various equipment, tools, and furniture requires help from cleanroom design experts. The placement of a sink, bench, storage cabinet or doorway may hinder effectiveness or disrupt laminar flow. The final cleanroom design must consider all essential processes, procedures, and personnel.
USP 797 Compliance: Gowning, Garbing, and PPE
USP 797 standards require consideration for proper gowning and personal protective equipment (PPE). The requirements may differ based on the State Board of Pharmacy. Some items like gloves, hoods, face masks, bunny suits, and shoe covers require safe and clean-forward disposal after every session. Cleanroom dispensers and receptacle arrangements are essential for throughput and efficient workflow. Less movement means faster task completion and reduced particulate generation.
Need Cleanroom Design Help at No Cost?
Upgrading or Building a New Cleanroom?
CleanPro®, a division of Production Automation, is a trusted ally of enterprises, research facilities, and government agencies. We leverage 100 years of cleanroom experience to draft, design, schedule, and coordinate full scale cleanroom integration and validation.
The content provided is for informational purposes only. It does not constitute a recommendation for your facility or organization. This post serves as a general guideline and summary. At time of publication, the information is in good faith, critically reviewed, and according to the most concurrent information available. Compliance requires temporal evaluation on a case-by-case basis according to state and federal law. The content herein, linked content, or other web content provided by Production Automation Corporation (PAC) makes no claims as to the final interpretations or implementation of regulatory documents provided by the FDA, State Board of Pharmacy, or United States Pharmacopoeia (USP). For this reason, PAC provides on-staff, licensed engineers who are experts in regulatory and application compliance. They are available every business day, toll free (888) 903-0333 for consultation at no cost, no obligation.