Production Automation Corporation now carries the newly introduced Techcon Systems TS8100 Series positive displacement progressive cavity (PC) pump. A continuously volumetric dispense pump based on PC technology, it is designed to dispense a wide range of fluids from low-viscosity coatings to high-viscosity greases. The pump is ideal for use in a variety of applications, such … Read moreNew Techcon TS8100 Series PC Pump now available from PAC
The most popular dispensing technique used in the manufacturing process is time and pressure dispensing (TPD) from a syringe barrel. This method became popular because if the low-cost, simple setup and lack of required maintenance. In addition, the dispensing repeatability rate produced by the TDP method is acceptable for a range of applications. A typical … Read moreDispensing: Recycle or Replace?
I&J2200N – 3 & 4 Axes | Working Area: 200mm x 200mm Features Ideal for form-in-place gaskets, adhesives, potting, coating, and filling Repeatability 0.006mm for perfect dispensing Performs continuous path and point-to-point motions System includes 16 I/O signal interface for connection to tools and controllers Software tip alignment routine for quick program offsets when changing … Read moreProduct Spotlight: Fisnar Robotics
For Threadlocking, Pipe Sealing, Gasketing, and Retaining By definition, anaerobic adhesives remain liquid until isolated from oxygen in the presence of metal ions, such as iron or copper. For example, when an anaerobic adhesive is sealed between a nut and a bolt on a threaded assembly, it rapidly “cures” or hardens to form a tough … Read morePermabond Anaerobic Adhesives & Sealants