The MRS-1100A Modular Rework System

is an integrated convection rework system

for the removal and reflow of BGA/CSP and SMT components.

The MRS-1100A is comprised of a hand-held convection tool, preheater, adjustable tool holder, and free-standing board holder to create a manually assisted rework system. A series of nozzles, targeting a variety of applications, and optional light magnifier round out the product offering for this system.

With standard features such as programmability, a digital display, program storage of up to 50 profiles, this system is not only versatile, but also easy and efficient to work with. A choice of board holders and accessories are available that make the system capable of handling multiple sizes of PCBs.

The MRS-1100A allows you the choice of using either the embedding profiling capability that can be configured to operate at a fixed temperature, or a four zone programming option. The unit also allows the temperature to be controlled either at the heat output (internal) or at the board (external). The “external” control function uses a thermocouple which can be placed on the board or a component.

Configure the System to Your Needs

The four components below are included in the MRS-1100A Rework System. They can also be purchased individually, visit to view all OKi options or contact us at [email protected]

HCT-1000 Programmable Hand Held Convection Tool

The HCT-1000 System is a fully programmable hand held convection rework tool that can both remove and place SMT components. It features digital controls, internal or external thermocouple feedback control, program storage of up to 50 profiles and integrated vacuum pick-up for component placement and removal. Additionally, with multiple modes of operation including manual, 4-zone heating, and as part of the MRS-1100A System, the HCT-1000 stands out as a verastile convection tool.

The hand-piece features vacuum and reflow buttons allowing the process to be operated manually or automatically through a profile when used as part of the Modular Rework System (MRS). Additionally, the vacuum has automatic lift off of components, at the end of the removal profile, taking guesswork out of the operators’ hands and improving process control.

As part of the MRS System, the HCT-1000 is connect via a cable to the PCT-1000, and may be used with ATH-1100A Adjustable Tool Holder. In this mode the HCT-1000 provides timing control for both units and the AHT-1100A allow repeatable place and remove operations.

ATH-1100A Adjustable Tool Holder

The ATH-1100A Adjustable Tool Holder is designed to work with the HCT-1000 or as part of the MRS-1100A System. The tool holder uses the Advanced Head Assembly which features 4″ of Z axis adjustment, ½” fine adjustment of the X & Y axis as well as 30° Θ adjustment. It also features locking hand-piece retainer, Z axis stop and mounting configurations for stand-alone operation or integrated as part of the MRS-1100A. The ATH-1100A is sturdy and easy to attach to the PCT-1000 Programmable Preheater when incorporated into the MRS System.

PCT-1000 Programmable Preheater

The PCT-1000 is a programmable preheater that provides users the ability to increase heat capacity with highly controlled thermal output. THe PCT-1000 can be used in a variety of processes including soldering, desoldering, SMD rework operations, and with its added heat capacity, will provide faster production rates while lowering overall process temperatures.

The preheater can be used in two modes; manual for constant heater temperature, and profile for greater control to maintain PCB board temperature with external thermocouple feedback.

With four programmable heating zones and one cooling zone, users select time and temperature targets, creating a preheat thermal profile. The PCT-1000 also has an advanced heater control function where the temperature is controlled either at the heater output (internal) or at the board (external thermocouple).

The PCT-1000 is equipped with an advanced convection heater creating a vortex effect that efficiently directs and concentrates heat.

BH-2000 Board Holder

The BH-2000 is a free-standing board holder that provides a solid and stable base for a variety of PCBs. The unit features easily adjustable rails to accommodate boards 8″ x 12″.

For a limited time, OKi is offering a special MRS-1100A Promotion!

Purchase the MRS-1100A Convection Rework system and automatically receive a

FREE MFR-1120 Soldering System with a BGA “Clean-Up” Tip. 

No gimmicks, no complication. Simply place your order for a MRS-1100A on Production Automation’s website and you will automatically receive a MFR-1120 and a CFV-BL100 Blade tip FREE. This is a $394.00 value. OKi is only offering this promotion through July 31, 2012. Contact us at 888-903-0333 or [email protected] for any questions, concerns, or any other assistance you may require.