Desiccators: Unique Stainless Steel Solutions from Palbam Class
Most manufacturers offer stainless steel accessories for their desiccators. Palbam Class uses only stainless steel. All modular designs – and “plug & play” if you have a product which requires protection from: Particles + Moisture + Oxygen then Palbam Class offers you unique solutions.
Nitrogen is the standard medium for contamination-free storage because it is relatively inert – it neither reacts with stored materials nor carries moisture – and because it can be isolated and purified relatively inexpensively.
Palbam Class Desiccator cabinets are set up so that an appropriate flow of nitrogen forces out all moisture and contamination-laden air. Because nitrogen has a lower specific gravity than air, it is introduced into the upper section of the desiccator, the heavier air is then purged out of the bottom.
Bench Top N2 Desiccator
Palbam Class Bench Top N2 Purge Desiccator Cabinets cut nitrogen expenses by up to 80%. Automates clean, dry bench top storage; eliminating moisture & oxygen related degradation and optimizing yields. Ideal for semiconductor components, biological and pharmaceutical samples, and other sensitive materials. Fully integrated turnkey system takes 30 seconds to install.
Desiccator has built in RH% sensor and display panel – allowing user to monitor real-time relative humidity levels within the cabinet. The easy to use control panel allows user to enter the required RH% level – the cabinet then regulates N2 input to ensure the desired RH% levels are maintained.
Fabrication materials: 304 Stainless Steel with an electropolished finish and static dissipative PVC window.
Safety Factor: Many uncontrolled N2 cabinets rely on a continuous flow of N2 into the cabinet. This N2 is also being continuously leaked into the cleanroom atmosphere – with the potential risk that this implies to the safety of the operators.
Palbam Class desiccator cabinets minimize the N2 usage and therefore minimize the N2 leakage into the cleanroom atmosphere.